-
www.JackHammers.com
Your most reliable source for top quality pneumatic tools, parts, service and experience
www.JackHammers.net www.Rockdrill.com www.Airrex.com
Search suggestions - click me!
Search term suggestions:×
- Check spelling (we don't use spellcheck)
- Use tool type, brand, model, part number, etc.
- Avoid filler words (a, the, for, verbs, etc.)
- Call us if you have a question (see Contact page)
- Example: "Airrex 6588 rockdrill"
IR
Model: PB-35
Paving Breaker
Proven reliability and productivity makes the PB35 units a favorite for bridge deck resurfacing and lightweight demolition of concrete and asphalt.
- One piece housing eliminates costly side rods and springs
- Power-stroke piston delivers more energy to the work surface and eliminates another costly wear item, the anvil block
- Built-in lubricator helps assure adequate lubrication
- Two roll pins and removal of the housing plug on the top head makes service access simple
| Model | Product Detail | Part Number |  |
| PB35AL8 | 1" x 4-1/4" HEX (C) | PB35AL8 | |
| PB35AS8 (Muffler) | 1" x 4-1/4" HEX (C) | PB35AS8 |
| Model | Handle Type | Muffler | Hex Shank Size | Weight w/o Accessory lbs (kg) | Stroke Length in. (mm) | Bore Diameter in. (mm) | Blows per Minute | Length w/o Accessory in. (mm) | Air Inlet NPT in. | Min Hose Size in. (mm) | Air Consumption @ Load cfm (L/min) |
| PB35AL8 | Standard | No | 1" x 4-1/4" | 40 (18) | 6.25 (159) | 1.75 (44) | 1,250 | 25 (625) | 3/4 | 3/4 (19) | 49 (1388) |
| PB35AS8 | Standard | Yes | 1" x 4-1/4" | 43 (20) | 6.25 (159) | 1.75 (44) | 1,250 | 25 (625) | 3/4 | 3/4 (19) | 49 (1388) |
| Paving Breaker & Clay Digger Bits | |||
| Longer Lengths Available for Most Tools - Call: 800‐241‐9669 | |||
| Tool: | Under Collar Length (inch): | Details: |  Part Number: |
 Asphalt Cutter |
11" | 5" Wide Blade | 100-AC |
 Bushing Tool |
8" | 16 Teeth | 100-BT |
 Clay Spade |
16" | 5-1/2" Wide Blade | 100-CS |
 Digging Chisel |
16" | 3" Wide Blade | 100-DC |
 Pin Driver |
8" | Socket: 3/8" Deep x 1-3/4" Dia. |
100-SD |
 Frost Wedge |
17" | 2" Wide Blade | 100-FW |
 Ground Rod Driver |
SOCKET DIAMETER: 11/16" | 100-GRD(A) | |
| 13/16" | 100-GRD(B) | ||
| 1" | 100-GRD(C) | ||
| 1-1/8" | 100-GRD(D) | ||
 Moil Point |
14" | LONGER LENGTHS AVAILABLE | 100P-14 |
| 18" | 100P-18 | ||
 Narrow Chisel |
14" | LONGER LENGTHS AVAILABLE | 100C-14 |
| 18" | 100C-18 | ||
 Wide Chisel |
14" | LONGER LENGTHS AVAILABLE | 100C3-14 |
| 18" | 100C3-18 | ||
 Detachable Shank |
7-3/4" | FOR USE WITH: TAMPER PAD TENT STAKE DRIVER SHEATHING DRIVER |
100-DS |
 Tamping Pad |
6" SQUARE | TPS-6 | |
| 8" SQUARE | TPS-8 | ||
| 7" ROUND | TPR-7 | ||
 Tent Stake Driver |
2" | TSD-200 | |
| 2-1/2" | TSD-250 | ||
 Sheathing Driver |
2" | TSH-200 | |
| 3" | TSH-300 | ||
Coming soon! Please call for safety data for this tool.
Coming soon! Please call for additional pictures available for this tool.
Coming soon! Please call for parts data for this tool.
Brands
