Search term suggestions:×
This is the Best Chipping Hammer available! A hard hitting and extremely tough tool. It's low breakdown record is superb! Great for general work including ramp and bridge decks, foundry and all around light demo.
This Tool Has A .580 Hex Shank x Oval Collar | |||
Model | Product Detail | Part Number | |
Viper ZP-2 Hex | 2" Stroke x 0.580 Hex | 6062-H |
0
|
Viper ZP-3 Hex | 3" Stroke x 0.580 Hex | 6063-H |
0
|
Viper ZP-4 Hex | 4" Stroke x 0.580 Hex | 6064-H |
0
|
This Tool Has A .680 Round Shank x Oval Collar | |||
Model | Product Detail | Part Number | |
Viper ZP-2 Round | 2" Stroke x 0.680 Round | 6062-R |
0
|
Viper ZP-3 Round | 3" Stroke x 0.680 Round | 6063-R |
0
|
Viper ZP-4 Round | 4" Stroke x 0.680 Round | 6064-R |
0
|
Viper-ZP "H" Series | |||
Model | 6062-H | 6063-H | 6064-H |
Chuck Size (inches) | .580 Hex | .580 Hex | .580 Hex |
Bore (inches) | 1-1/8" | 1-1/8" | 1-1/8" |
Stroke (inches) | 2" | 3" | 4" |
Blows/Min. [/sec.] | 2100 | 1650 | 1375 |
PSI | 90psi | 90psi | 90psi |
CFM | 32-34cfm | 33-35cfm | 34-36cfm |
Weight (lbs.) | 17 lb | 18 lb | 19 lb |
Length (inches) | 12-3/4" | 14-9/16" | 15-9/16" |
Viper-ZP "R" Series | |||
Model | 6062-R | 6063-R | 6064-R |
Chuck Size (inches) | .680 Round | .680 Round | .680 Round |
Bore (inches) | 1-1/8" | 1-1/8" | 1-1/8" |
Stroke (inches) | 2" | 3" | 4" |
Blows/Min. [/sec.] | 2100 | 1650 | 1375 |
PSI | 90psi | 90psi | 90psi |
CFM | 32-34cfm | 33-35cfm | 34-36cfm |
Weight (lbs.) | 17 lb | 18 lb | 19 lb |
Length (inches) | 12-3/4" | 14-9/16" | 15-9/16" |
Chipping Hammer Bits | |||||
Longer Lengths Available for Most Tools - Call: 800‐241‐9669 | |||||
Points & Chisels | Under Collar Length (inches) | Oval Collar |
Oval Collar |
Round Collar |
Round Collar |
Moil Point |
12" | OCHS-12P | OCRS-12P | RCHS-12P | RCRS-12P |
18" | OCHS-18P | OCRS-18P | RCHS-18P | RCRS-18P | |
24" | OCHS-24P | OCRS-24P | RCHS-24P | RCRS-24P | |
Narrow Chisel |
12" | OCHS-12C | OCRS-12C | RCHS-12C | RCRS-12C |
18" | OCHS-18C | OCRS-18C | RCHS-18C | RCRS-18C | |
24" | OCHS-24C | OCRS-24C | RCHS-24C | RCRS-24C | |
2" Wide Blade Chisel |
12" | OCHS-12C2 | OCRS-12C2 | RCHS-12C2 | RCRS-12C2 |
18" | OCHS-18C2 | OCRS-18C2 | RCHS-18C2 | RCRS-18C2 | |
24" | OCHS-24C2 | OCRS-24C2 | RCHS-24C2 | RCRS-24C2 | |
3" Wide Blade Chisel |
12" | OCHS-12C3 | OCRS-12C3 | RCHS-12C3 | RCRS-12C3 |
18" | OCHS-18C3 | OCRS-18C3 | RCHS-18C3 | RCRS-18C3 | |
24" | OCHS-24C3 | OCRS-24C3 | RCHS-24C3 | RCRS-24C3 | |
4-1/2" Wide Clay Spade |
10" | OCHS-CS | OCRS-CS | RCHS-CS | RCRS-CS |
1 Pc. All-Steel Bushing Tool |
8" | OCHS-BT | OCRS-BT | RCHS-BT | RCRS-BT |
Visit:
www.RockDrill.com and www.Airrex.com
1.800.241.9669 |
*All logos on this website are copyright of their respective owners.
MATW, INC. All rights reserved.
~ Site design by Benedic Tahtoo ~