Search term suggestions:×
Model | Product Detail | Part Number | |
TEX 10PS | 7/8" x 3-1/4" HEX (A) | 8461021130 |
0
|
TEX 10PS KL | 7/8" x 3-1/4" HEX (A) Kick-latch | 8461021132 |
0
|
Description | TEX 10PS |
Part no | 8461021130 |
Tool shank (inch) | 7/8 x 3-1/4 |
Weight (lb) | 22.5 |
Air consumption at 92 psi (cfm) | 36 |
Length (inch) | 20-1/2 |
Impact frequency (blows/min) | 1350 |
Impact frequency (Hz) | 22.5 |
Tool Retainer | Cap |
Vibration level 3 axes (ISO 20643) (m/sec2) | 22.4 |
Sound power level guaranteed (2000/14/EC) (Lw, dB(A)) | 102 |
Sound pressure level (ISO 11203) (Lp, r = 1m) | 90 |
Description | TEX 10PS KL |
Part no | 8461021132 |
Tool shank (inch) | 7/8 x 3-1/4 |
Weight (lb) | 23.6 |
Air consumption at 92 psi (cfm) | 36 |
Length (inch) | 20 |
Impact frequency (blows/min) | 1350 |
Impact frequency (Hz) | 22.5 |
Tool Retainer | kick-latch |
Vibration level 3 axes (ISO 20643) (m/sec2) | 22.4 |
Sound power level guaranteed (2000/14/EC) (Lw, dB(A)) | 103 |
Sound pressure level (ISO 11203) (Lp, r = 1m) | 91 |
Clay Digger Bits | |||
Longer Lengths Available for Most Tools - Call: 800‐241‐9669 | |||
Tool: | Under Collar Length (inch): | Details: | Part Number: |
Asphalt Cutter |
11" | 5" Wide Blade | 78-AC |
Bushing Tool |
8" | 16 Teeth | 78-BT |
Clay Spade |
16" | 5-1/2" Wide Blade | 78-CS |
Digging Chisel |
16" | 3" Wide Blade | 78-DC |
Pin Driver |
8" | Socket: 3/8" Deep x 1-3/4" Dia. |
78-SD |
Frost Wedge |
17" | 2" Wide Blade | 78-FW |
Ground Rod Driver |
SOCKET DIAMETER: 11/16" | 78-GRD(A) | |
13/16" | 78-GRD(B) | ||
1" | 78-GRD(C) | ||
1-1/8" | 78-GRD(D) | ||
Moil Point |
14" | LONGER LENGTHS AVAILABLE | 78P-14 |
18" | 78P-18 | ||
Narrow Chisel |
14" | LONGER LENGTHS AVAILABLE | 78C-14 |
18" | 78C-18 | ||
Wide Chisel |
14" | LONGER LENGTHS AVAILABLE | 78C3-14 |
18" | 78C3-18 | ||
Detachable Shank |
7-3/4" | FOR USE WITH: TAMPER PAD TENT STAKE DRIVER SHEATHING DRIVER |
78-DS |
Tamping Pad |
6" SQUARE | TPS-6 | |
8" SQUARE | TPS-8 | ||
7" ROUND | TPR-7 | ||
Tent Stake Driver |
2" | TSD-200 | |
2-1/2" | TSD-250 | ||
Sheathing Driver |
2" | TSH-200 | |
3" | TSH-300 |
Visit:
www.RockDrill.com and www.Airrex.com
1.800.241.9669 |
*All logos on this website are copyright of their respective owners.
MATW, INC. All rights reserved.
~ Site design by Benedic Tahtoo ~